The 7-Step Checklist I Run Before Approving Any Compaction Equipment Order

Published Tuesday 3rd of November 2026 By Charlotte Avery

The 7-Step Checklist I Run Before Approving Any Compaction Equipment Order

This checklist is for procurement managers, fleet controllers, and anyone who signs off on compaction equipment — tandem rollers, soil compactors, vibratory plates, the whole set. It's the version I actually use. Not the one in our company handbook, which runs 42 pages and gets skipped by anyone who's been on the job more than a year. This one is 7 steps. Roughly 90 minutes if you've got the quotes in front of you, plus however long a vendor takes to send the documents you ask for (usually three days; occasionally three weeks). It works for new purchases and replacement decisions, though the resale math gets fuzzy once a unit is past the 8-year mark — I'd rebuild step 3 from scratch in that case, not just copy the formula.

If you're approving your first POs this quarter, run all seven. If you've been doing this for a while, run steps 1, 2, and 6. Those are the ones that keep leaking money even for experienced buyers.

Step 1 — Classify the asset before anyone prices it

Lost budget lines almost always start here. Two years ago a requisition came through my desk labeled "crusher — urgent, site office." Turned out to be a Skullcandy Crusher Evo headphone set someone wanted for the field office, misfiled under heavy equipment so it would clear purchasing faster. Funny until you realize it blocked a separate $14,000 line item behind it in the approval queue for three weeks. That, right there, is the cost of lazy classification.

The category question matters more than it sounds. A trash compactor — the waste-handling kind — sits in a completely different budget than a soil compactor or a tandem roller. Different vendors, different service contracts, different depreciation schedule. I've caught two cross-posts like that in the last four quarters. So before pricing: what is the asset class, what is the job it performs, and which budget line does it actually belong to? Write it down. Have the requester sign it. If they can't answer the three questions, the requisition goes back.

Step 2 — Ask for the parts manual before the sales brochure

This is the step most people skip. It's the one that saves the most money.

When we evaluated hamm construction equipment for our asphalt crew in early 2022, the sales rep sent the glossy deck first. Nice deck. Told me nothing about whether the machine shares wear parts with the units already in our yard. So I asked for the actual hamm parts manual — not a service brochure, not a parts catalog summary, the manual — and cross-referenced the wear items against our existing stock. Two of the three major wear components were common across the lineup. That's a real number: about $2,400 a year in fewer unique SKUs on the shelf, plus shorter lead times when something fails at 6 a.m. before a paving window.

Why does this matter? Because the invoice price is the smallest variable in the equation. Part commonality and dealer stock are what actually move the number. A machine with a beautiful spec sheet and a custom-fit part for every wear surface is a machine you'll be renting replacements for come April.

Step 3 — Build the TCO model, not the invoice

The invoice total is one cell in a spreadsheet that should have fifteen. I'm not going to pretend ours is perfect — it isn't, and I've rebuilt it twice now. What it tracks: purchase price, freight, dealer setup, first-year service, expected parts consumption (drawn directly from the manual in step 2), projected downtime cost, and resale estimate at the end of the hold period.

Here's the lesson I learned the hard way. In Q3 2023 I approved a quote that came in $3,100 under a competing bid. Looked like a clean win. Six months later the unit was down twice for a component that was a special order — four-week lead time each instance. We rented a replacement both times. Total rent: $4,800. Net position: $1,700 worse than the "expensive" quote, which had included a dealer-managed loaner clause in the service agreement.

Put another way: cheap is a number, value is a schedule. They usually don't point in the same direction, and when they do, it's worth asking why.

Step 4 — Confirm the dealer network covers your actual jobsite

Ask: where is the nearest service truck, and how far is the drive from our sites at 5:30 a.m.? Not "how many dealers do you have in the region." Distance. Response commitment in writing. A named service contact, not a hotline number.

For the hamm units we run, the dealer footprint inside our operating radius is one of the reasons we standardized on the brand in the first place. That said, I don't treat that as a permanent verdict. I've said no to equipment with a strong name and a thin local support structure more than once. A machine with a great spec sheet and a 200-mile service radius is a $250,000 paperweight in a bad month.

Step 5 — Don't let "compactor" categories blur together

It's tempting to think a compactor is a compactor is a compactor. But the soil unit, the asphalt roller, the trash compactor, and the handheld vibratory plate don't share specs, budgets, or operators. Maintenance schedules differ. Operator certifications differ. Depreciation curves are completely different animals. When I build the annual budget, they sit in separate lines, and I push back on anyone who wants to merge them for "simplicity."

Simplification is great for spreadsheets. It's expensive for the fleet.

Step 6 — Verify the machine class against the job spec

"What is a skid steer?" — I overheard that question last year from a junior buyer, and honestly, it's a fair one when the requisition just says "small loader." The answer changed the quote: what our earthworks crew actually wanted was a skid steer for tight-site grading and material handling, not a compact roller. Two different machines, two different budgets, and one of them was priced against the wrong line of the request.

So before the PO goes anywhere, re-read the job spec. Machine class, operating weight, drum configuration, compaction output. If any of those don't match what the vendor priced, the quote is wrong regardless of how good the number looks on paper.

Step 7 — Negotiate the paperwork and the training, not just the price

Every rep expects a price conversation. Fewer expect you to ask for the service documentation package, the operator training session, the parts catalog on day one, and a written response-time commitment. All four of those are worth more than the third decimal place on the price workup. To be fair, not every vendor can include all four — smaller dealers genuinely can't throw in a training session without charging for it. But asking tells you where they're thin.

On our last two orders, the negotiated price moved less than 2%. The documentation and training package, priced separately, would have cost us roughly $3,800. That's where the real negotiation lives — in the paperwork and the schedule, not in the last $200 on the invoice.

Where this checklist usually breaks

Three mistakes I've made, or watched colleagues make, often enough that they're worth naming outright:

  • Treating the lowest quote as the starting point. It's not a starting point. It's a data point. Sometimes the low quote is genuinely correct — typically for smaller, standard-spec units with no downtime exposure. Usually it isn't, and the gap shows up in step 3.
  • Skipping the parts manual because the dealer seems responsive. Responsive this quarter isn't protection next year. Get the document.
  • Letting the budget cycle dictate the classification. If a machine doesn't fit the line item, fix the requisition. Don't relabel the asset to make the spreadsheet work.

None of this is glamorous. It's a checklist. But the money leaks out of the gaps between the steps, and a checklist is the cheapest thing I know for closing them.

Prices and service figures above are drawn from our internal procurement records (2022–2024). Current market rates, dealer terms, and availability will differ — verify against current quotes before committing.

Need Help Selecting Equipment?

Describe your jobsite conditions and our application engineers will recommend the right configuration.

Ask an Engineer